Sections

Preparation

• INOA 7.43
• INOA 8.04
• INOA OLEO GEL
• INOA RICH DEVELOPER 20/30 VOL.
• INOA POST SHAMPOO

Technique

1. 1. Using the illustration as a guide, design section 1 by creating 2 large triangle shapes just above each ear.
2. 2. Section 2 will be all of the remaining hair.
3. 3. Apply INOA 8.04 to section 1, re-growth through mid-lengths and ends.
4. 4. Apply INOA 7.43 to section 2, re-growth through mid-lengths and ends.
5. 5. Process for 35 minutes.
6. 6. To remove product, perform a gentle dry emulsification (without water). Continue with a wet emulsification. After a few minutes rinse thoroughly until the water runs clear.
7. 7. Shampoo twice with INOA POST SHAMPOO.
   
   
   
   
   
   
   
   

Sections

Preparation

• INOA 4.15, INOA 5.12, INOA 7.23
• INOA OLEO GeL
• INOA RICH DEVELOPER 20/30 VOL.
• INOA POST SHAMPOO

Technique

1. 1. Using the illustration as a guide, create a halo section around the head which is deeper through the crown area. Within this section design a deep zigzag weave to create sections 1 and 2. All of the remaining hair is section 3.
2. 2. Apply INOA 7.23 to section 1.
3. 3. Apply INOA 5.12 to section 2.
4. 4. Apply INOA 4.15 to all of the remaining hair in section 3.
5. 5. Process for 35 minutes.
6. 6. To remove product, perform a gentle dry emulsification (without water). Continue with a wet emulsification. After a few minutes rinse thoroughly until the water runs clear.
7. 7. Shampoo twice with INOA POST SHAMPOO.

Sections

Preparation

• INOA 9.01
• INOA 10.1
• INOA 8.1
• inOa OLeO GeL
• inOa rich deveLOPer 20/30 vOL.
• INOA POST SHAMPOO
• PLATINIUM AMMONIA-FREE
• PLATINIUM NUTRI-DEVELOPER
• easi-meches® fOiL (recommended)

Technique

1. 1. Pre-lighten the re-growth with Platinium ammonia-free Lightener. Develop for up to 50 minutes, until you reach your desired level of lightening. Rinse and shampoo with INOA Post shampoo. Dry the hair.
2. 2. Using the illustration as a guide, create a crescent shape .5 inches deep at the front left hairline. This will be section 1.
3. 3. All of the remaining hair is section 3.
4. 4. Create small free-hand slices within the haircut. These will be sections 2.
5. 5. Apply INOA 8.1 to section 1.
6. 6. Apply INOA 9.01 to section 2 and isolate.
7. 7. Apply INOA 10.1 to all the remaining hair in section 3.
8. 8. Process for 35 minutes.
9. 9. To remove product, perform a gentle dry emulsification (without water). Continue with a wet emulsification. After a few minutes rinse thoroughly until the water runs clear.
10. 10. Shampoo twice with INOA POST SHAMPOO.

Sections

Preparation

• INOA 5.32, INOA 6.32, INOA 7.31, INOA 8.34
• INOA OLeO GeL
• INOA Rich Developer 20/30 vOL.
• INOA Post SHAMPOO

Technique

1. 1. Using the illustration as a guide, divide the hair into 4 sections from the center front to center nape, and from ear to ear.
2. 2. Starting in the back left section, create a 1 inch deep weave.
3. 3. Divide the section into 3 horizontal slices (1, 2 and 3).
4. 4. Starting at the base of each horizontal slice apply the following colors to each corresponding slice:
   Section 3: INOA 5.32
   Section 2: INOA 6.32
   Section 1: INOA 7.31 from re-growth to mid-lengths and INOA 8.34 from the mid-lengths to ends
5. 5. Repeat this pattern throughout, until all the hair is colored.
6. 6. Process for 35 minutes.
7. 7. To remove product, perform a gentle dry emulsification (without water). Continue with a wet emulsification. After a few minutes rinse thoroughly until the water runs clear.
8. 8. Shampoo twice with INOA POST SHAMPOO.

Sections

Preparation

• INOA 8.33
• INOA 9.3
• INOA OLeO GeL
• INOA rich deveLOPer 20/30 VOL

Technique

1. 1. Using the illustration as a guide, take a traditional 4-center parting from the hairline to nape, and ear to ear.
2. 2. Gently backcomb the re-growth area, 2 inches deep from backcomb of the center part back towards the crown.
3. 3. Apply INOA 8.33 to the backcombed area, leaving your backcombing in place.
4. 4. Apply INOA 9.3 to all of the remaining re-growth area, mid-lengths and ends.
5. 5. Process for 35 minutes.
6. 6. To remove product, perform a gentle dry emulsification (without water). Continue with a wet emulsification. After a few minutes rinse thoroughly until the water runs clear.
7. 7. Once the color has completely loosened, continue with a wet emulsification. After a few minutes rinse thoroughly until the water runs clear.
8. 8. Finish with INOA POST SHAMPOO.

Sections

Preparation

• INOA 5.56
• INOA OLEO GEL
• INOA RICH Developer 20/30 VOL.
• OA POST SHAM POO

Technique

1. 1. Apply INOA 5.56 globally to the re-growth area.
2. 2. Using the illustration as a guide, in a circular movement around the head, weave large freehand sections in 2 layers, and take the color through to the mid-lengths and ends immediately on woven sections.
3. 3. Allow the color to develop for 30 minutes.
4. 4. Take the color through the mid-lengths and ends of the remaining hair for the last 5 minutes of the development time to create subtle ribbons of color. Process for remaining 5 minutes.
5. 5. To remove product, perform a gentle dry emulsification (without water). Continue with a wet emulsification. After a few minutes rinse thoroughly until the water runs clear.
6. 6. Shampoo twice with INOA POST SHAMPOO.

Sections

Preparation

• INOA 8, INOA 9, INOA 10
• INOA OLEO GEL
• INOA Rich Developer 20/30 vOL.
• INOA POST SHAMPOO

Technique

1. 1. Using the illustration as a guide, create random 1 inch squares within the mid-section of the hair. These will become sections 1.
2. 2. Create further random 1 inch squares within the lower section of the hair. These will become sections 2.
3. 3. All of the remaining hair is section 3.
4. 4. Apply INOA 9 to squares in section 1.
5. 5. Apply INOA 8 to squares in section 2.
6. 6. Apply INOA 10 to all remaining hair in section 3.
7. 7. Process for 35 minutes.
8. 8. To remove product, perform a gentle dry emulsification (without water). Continue with a wet emulsification. After a few minutes rinse thoroughly until the water runs clear.
9. 9. Shampoo twice with INOA POST SHAMPOO.

Sections

Preparation

• INOA 8.21
• INOA 9.2
• INOA OLEO GEL
• INOA RICH Developer 20/30 VOL.
• INOA POST SHAMPOO
• PLATINI UM AMM ONIA -FREE
• PLATINI UM NUTRI -DEVE LOPER
• EASI-MECHE ® FOIL (recommended)

Technique

1. 1. Create a 1 inch deep section all around the front hairline. This will become section 1.
2. 2. Starting 1 inch back from front hairline, create a 1 inch deep halo section from front back through the crown area. This will become section 2.
3. 3. All of the remaining hair in section 3.
4. 4. Within section 1, create very fine random highlights using Platinium Ammonia-Free and isolate.
5. 5. Apply INOA 8.21 to all of the remaining hair in section 1 and to all of section 3.
6. 6. Apply INOA 9.2 to section 2.
7. 7. Process for 15 minutes.
8. 8. Apply INOA 8.21 to the mid-lengths and ends of all the remaining hair, and develop for another 20 minutes.
9. 9. To remove product, perform a gentle dry emulsification (without water).
10. 10. Shampoo twice with INOA POST SHAMPOO